How to paint kitchen cabinet hinges

how to paint kitchen cabinet hinges

How to Paint the Hinges or Hardware on Your Cabinets or Furniture

May 13,  · Painting Cabinet Hinges Set the hinges flat on a a sheet of old newspaper with the parts you want to paint facing up. If you plan to paint both sides, the most visible sides should be face-up. Put on a respirator and spray a coat of metal primer on all the hinges, using an aerosol can. Spray the hardware with a metallic enamel paint color of your choice. Lightly spray back and forth to provide even coverage. Allow the first coat of paint to dry to the touch before applying the.

One of the most inexpensive what is potassium in our body to update the look of your entire kitchen is to change your cabinet door hinges. While most cabinets used to how to paint kitchen cabinet hinges brass hinges, most modern cabinets have stainless-steel or nickel hinges.

Whatever your hinges are made of, you can paint them for a cleaner, brighter look, instead of spending money buying and installing new hinges. Remove the cabinet doors from the cabinet with a regular or electric screwdriver. Do not use a drill because it could strip the screw heads. Once you remove the doors, you can remove the hinges and begin working on them. To get spray paint to adhere to your cabinet door hinges, you must first clean them.

Pour some metal cleaner into a small container, and place the hinges and screws into the cleaner. Let the pieces sit in the cleaner for hours. Next, put a drop cloth down on a work surface, and put gloves on. Remove the hinges from the cleaner, and brush them clean with a wire brush to strip off the metal finish or any existing paint. Clean away any dirt. Repeat the cleaning process with all hinge pieces. Use a dry cloth to wipe them off and make sure that no cleaner remains.

Warning: Wear the appropriate safety gear when working with paint, and make sure you use the paint in a well-ventilated area. Line the door hinges up on the drop cloth. Hold the spray can about 8 inches away from the work pieces, and spray them evenly with the paint. You'll want to start with a rofl what does that mean of rust-free primer and add the final coat of paint later.

Let the paint dry completely, and then flip the hinges over. Spray the underside of the hinges in the same way, holding the can about 8 inches away. Let the pieces dry completely before touching them again. Once the hinges are dry, re-attach them to the cabinet door. Secure the hinges with screws, being careful not to scratch the finish with the screwdriver.

Finally, lift the cabinet door back into position on the cabinet face. Line up the cabinet door hinges, and make sure they are level before securing them with screws. Starting at the top, screw the hinges and install the doors. Repeat this procedure with all doors. To continue updating your cabinets, consider refacing them.

We welcome your comments and suggestions. All information is provided how to use clinique turnaround instant facial IS. All rights reserved.

You may freely link to this site, and use it for non-commercial use subject to our terms of use. View our Privacy Policy here. Toggle navigation subscribe. How to Paint Cabinet Door Hinges. Written by Justin Stewart. To ensure our content is always up-to-date with current information, best practices, and professional advice, articles are routinely reviewed by industry experts with years of hands-on experience.

Gabriel Connor Salter. What You'll Need. Spray-on primer rust-inhibiting variety. Spray paint. Metal cleaner. Small bowl.

Drop cloth. Wire brush. Step 1 — Remove the Cabinet Door Remove the cabinet doors from the cabinet with a regular or electric screwdriver. When to Use Rising Butt Hinges. Resurfacing Cabinets by Trial and Error. Related Posts Problems with recently painted kitchen cabinets. Background: we had wooden cabinets in our kitchen that were decades old.

Read More. Replacement cabinet hinges help. Hello all! I am looking for some advice with my kitchen cabinets. Painting door hinges. How should I paint door hinges without removing them?

My hinges were painte Hinge detached from back of mirrored door on medicine cabinet. Hello, I have a medicine cabinet in my bathroom. The cabinet has two doo Related Posts Cabinet doors and hinges. Kitchen cabinet hinge and door issue.

So I took off the old kitchen cabinets to do a complete redo on them. I had Cabinet door hinge anchors ripped out. Hi, I have an Ikea kitchen, came with the apartment.

Anyway one of the cabi Popular Articles. How to Spray Paint Cabinet Doors. By Justin Stewart. Create an Industrial Look with Screen Ca Installing Invisible Hinges in Kitchen C Installing Invisible Hinges in Kitchen Cabinets.

Get Connected

My hubby and I love Krylon spray paint. We prefer it to Rustoleum brand, or the cheaper store brands. It dries much faster. A good product at a fair price. Just moved in and my kitchen needs a retouch! This would be fun to do! I actually spray painted my hammered copper handles and hinges when I refinished my cabinets over 10 years ago and they still look great. There's a little wear on the 2 cabinets that get opened the most.

Another tip for any exterior facing screws, stick them in the foam and spray the heads, too. Works great. I did put a primer coat on mine, also. I just spray painted our dated kitchen light fixtures. What a pain to tape off the whole ceiling with huge garbage bags. They are not perfect bc I was scared of the fumes so I kept running away but they are better! I love using spray paint! I remember updating our horrible outdoor lights years ago when you had s.

Ours turned out amazing! My faves are ORB and hammered black. I LOVE your comments, thank you! I read every single one. If you have a specific question I will do my best to answer you back here! Hello my friends! I'm back to share a project involving one of my very favorite DIY "tools" ever -- spray paint! I've blabbed on and on about my love of spray paint for years now. It's one of the easiest and least expensive ways to completely transform an item or room!

I was thrilled when Krylon asked me to work with them this year. I've used their paints on tons of projects over the years and was excited to try out some new-to-me versions as well. I have some fun and helpful projects planned over the next few months. This first one is in the kitchen and I'm SO excited about this transformation! When I was picking out the finishes for this house, I went much "softer" than I had done in the past.

The floors were originally much lighter that flooring became unavailable so we had to go with something different , and I went lighter with the cabinets, paint, hardware It felt right at the time, as we were starting fresh.

But I quickly discovered that I am a contrast lover through and through. Almost immediately I was craving it. I started painting walls super dark , hung dark wallpaper and changed out some lighting for bigger and bolder options.

For a couple years now I've been eyeing our kitchen hardware:. I love the handles and the color is gorgeous! But they haven't felt substantial enough for me for awhile. It was something I noticed every time I walked in the kitchen. Last spring I decided to buy a set of black handles just to see if I liked them:.

We loved them! But it would have been hundreds of dollars to replace them. And ours are really nice, I just wanted to change the color. Spray paint to the rescue!! I've spray painted hardware in the past and it's a really easy DIY project. For this one I used the Krylon Fusion All-in-one spray paint :. I wanted a slightly more modern feel so I went with the satin black. It's more of a matte finish but not dull at all.

Spraying hardware can be tricky because you need to get all the angles. Sometimes it's difficult to access it all. My friend Lindsay shared this brilliant tip on Instagram:. Step one: Prep your hardware well. I worked in shifts -- I would remove four handles at a time. I left the screws in the cabinets so there was no worry about misplacing them. I used a soft, damp cloth to wipe down the hardware well.

There's no need to use cleaners unless you have grease build up or something stuck. Dry them well and then let sit for a bit to ensure they are completely dry. Step two: Start spraying! But not too much. My biggest tip when it comes to spraying an item is to use a very light hand. Try not to hold down the nozzle and go to town. For items that you want a "factory" finish on, lighter coats and more of them are best. I did three to four coats each, which may sound like a lot -- but you only have to wait about a minute in between coats.

That's another reason for spraying lightly If you spray too heavily or too thick you'll get drips, or it will get gummy and take forever to dry. If you add more coats on top of that it's a recipe for a mess.

I also recommend starting to spray just before the item and then continuing off to the side. I learned this super helpful trick when I used a sprayer to paint our old kitchen cabinets. This helps control your spray and keeps the coats super even. This spray went on like butter! Zero drips, zero splatter You can see here how my set up worked:. The gardening tool was just used to weigh down the foam a bit.

This contraption made painting these SO much easier! What a great idea! Step three: Let them cure! After the last coat I made sure to give them a good 20 minutes to dry before handling them at all. Then I moved to another spot to dry for longer. I used a cardboard box in the sun on nice days with no humidity:. Check out that beautiful finish! On those I brought them inside and placed them over an air vent to dry.

After they sat for a couple hours I was able to reinstall them, but at first I didn't tighten them against the cabinets:. We didn't use the handles and 24 hours later I fully tightened them.

For the next few weeks we will use a light touch, but they are completely useable! You just want to avoid knocking anything into them while they cure, or completely dry. When you take your time spray painting you'll get a factory finish on your "new" hardware!

You can use a primer before painting as well, but this Krylon Fusion All-in-one paint is just that, all in one! No sanding or priming is required, which is a huge time saver! In my experience, cleaning the item well and then letting it fully cure is most important. The black hardware makes such a big difference in here! We LOVE it!! Start to finish this took a few days, but by far the majority of that time was letting the hardware dry.

I also did it in shifts because I only had four spots in my spray paint "station. Both versions of the hardware are equally pretty -- but I was craving more distinction. This was such an easy and cheap transformation. Spray paint can make such a difference!

I'm a HUGE fan of using black accents in a room. It's one of my favorite ways to decorate a space. I really wanted to tie in our lights and island stools:.

More articles in this category:
<- How to make a jack-in-the-box - How do you get to pitcairn island->

5 thoughts on “How to paint kitchen cabinet hinges

  1. Ararr Reply

    I found your Chanel when you were playing the co op game in prison and have been hooked on your play through ever since

Add a comment

Your email will not be published.. Required fields are marked *